Reverse engineering and 3D scanning: how it works

By the CAD CAM Galaxy team · Updated 16 Nov 2026

Reverse engineering recreates a CAD model from a physical part. The part is 3D scanned, the scan is cleaned and converted into a model, and the result is checked against the original, so the part can be re-made, improved or inspected.

The usual workflow

  1. Prepare the part. Clean it, and treat shiny or dark surfaces so the scanner can read them.
  2. Scan. A structured-light (blue-light) scanner captures millions of points on the surface from several angles.
  3. Build a mesh. The point data is aligned and converted into a surface mesh, with holes and noise repaired.
  4. Create CAD. For parts that must be manufactured or edited, the mesh is used as a reference to build proper surfaces or a parametric model.
  5. Inspect. The new model, or the scan itself, is compared with the part to produce a colour deviation report.

When it is worth doing

  • Old or imported parts with no drawing
  • Worn tools, dies and moulds that need rebuilding
  • Checking a manufactured part against its CAD model
  • Capturing hand-made or modified shapes

A word of caution

Reverse engineering is for parts you own or have the right to reproduce. Always make sure that copying a part does not infringe someone's design rights.

Need help or a quotation?

CAD CAM Galaxy supplies licensed CAD/CAM software and trains engineers across India, with centres in Mumbai, Palghar and Vapi. Use the form below or see the related pages.

Get a quote for your licences

Tell us which software you need, how many seats, and what your team machines or designs. We quote, supply, install and support — and reply within one working day.

Hours

Mon – Sat: 10:00 AM – 7:00 PM

WhatsApp Call us