Mould-flow simulation explained

By the CAD CAM Galaxy team · Updated 16 Nov 2026

Mould-flow simulation is computer software that predicts how molten plastic will fill a mould, pack, cool and shrink. It lets engineers fix gate position, wall thickness, cooling and venting on screen, before a costly steel mould is made.

What it predicts

  • Filling: does the plastic reach every corner, and in what pattern?
  • Weld lines and air traps: where flow fronts meet or air is trapped, weakening or marking the part.
  • Packing and shrinkage: how much the part shrinks and where sink marks may appear.
  • Cooling: whether heat is removed evenly and how long a cycle needs.
  • Warpage: how the part may bend after ejection.

Who uses it and when

Mould designers, plastic part designers and moulders use it at the design stage and when troubleshooting a mould that does not produce good parts. Running a simulation before cutting steel is far cheaper than modifying a finished tool.

Limits to keep in mind

A simulation is only as good as its inputs: the 3D model, the material data, the process settings and the mesh. It guides decisions; it does not replace trials on the actual machine. Treat the results as strong evidence, and confirm with a mould trial.

Need help or a quotation?

CAD CAM Galaxy supplies licensed CAD/CAM software and trains engineers across India, with centres in Mumbai, Palghar and Vapi. Use the form below or see the related pages.

Get a quote for your licences

Tell us which software you need, how many seats, and what your team machines or designs. We quote, supply, install and support — and reply within one working day.

Hours

Mon – Sat: 10:00 AM – 7:00 PM

WhatsApp Call us